Here is how to include the new 800 series ZEN74 Toggle Dimmer to your Hubitat.
Smart Start Inclusion
On the Hubitat app:
- Open the Tools tab (wrench icon on the bottom)
- Scroll to the bottom, select Z-Wave
- This will take you to a screen where you can select either Smart Start or regular inclusion
- Select Smart Start
- This will take you to the smart start inclusion list. Devices will be displayed there that are in the process of inclusion through Smart Start.
- Select the QR symbol in the top right to open the camera for the DSK scan (Scan the QR code printed on the metal faceplate of the switch)
- The device integration will begin. The window will appear asking you to name the device; click Save after naming
- Finishing inclusion may take a few minutes
If you have any issues with Smart Start Inclusion on Hubitat, please review this video: https://www.youtube.com/watch?v=Sf-Fldjb0to. The steps should be the same whether you have a C-7 or C-8.
Manual Inclusion
-
Open Hubitat in your Internet browser
-
Go to Devices
-
Click on + Add Device in the top right corner
-
Click on Z-Wave
-
Click on Start Z-Wave Inclusion
-
While the app says is in inclusion mode, toggle the dimmer up 3 times as quickly as possible
-
The LED indicator will blink blue to show signal communication, turn green for 3 seconds once inclusion is successful, or red for 3 seconds if inclusion fails.
-
If you're using the new C7 hub, it may ask you to enter the unique 5-digit DSK code: look for it in the lower left corner on the front metal plate of the switch.
-
On C7, if choosing the security level, you can either leave it at the S2 Authenticate level or uncheck all security boxes (this device supports S2 Authenticated or non-secure inclusion only).
-
-
Rename and confirm the found device
Reach out to us if your switch is having trouble being added to your hub, or if you have any other questions!