Connecting your ZEN74 Dimmer to SmartThings couldn't be easier!

You'll want to install the new lua Edge driver for the device first, in order to access all the advanced features of the dimmer; however, it will be recognized as a simple dimmer out of the box on SmartThings.

Once the driver is installed, just follow these steps to include the ZEN74 Dimmer to SmartThings:

1. Tap the plus icon in the home screen
2. Tap Device
3. Tap "Scan nearby" (in the corner of the screen)
4. While the app says "Scanning...", toggle the dimmer UP 3 times as quickly as possible
   • The LED indicator should flash in blue to confirm it has signal communication. Once paired, it will flash green 3 times. If inclusion fails, it will flash red 3 times.
   • If the app displays any security errors or disclaimers, just skip them.
5. The app will indicate when the device connects, it may take 10-20 seconds so please wait a little before exiting.
6. Tap Edit to rename the device, and tap Done to save the name
7. Tap Done to complete the setup

* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.

Let us know if you have any questions, we'll be happy to help!