You can fully customized the ZEN74 Toggle Dimmer by adjusting the ramp rate, double tap and single tap behavior, or manual dimming speed.

Use these instructions to change the advanced settings for the ZEN74 in your Vera interface; we used the ramp rate as an example, but the same steps apply to any other parameter. Take a look at all of the advanced options for this model here. 

How to change an advanced setting for your ZEN74 Toggle Dimmer in Vera:

1. Open your Vera online interface (the browser dashboard, not the app)
2. Click on the Zooz ZEN74 Toggle Dimmer
3. Go to Device Options
4. Click on Add configuration settings
5. Put in the following to change the ramp rate (fade-in/fade-out effect):
   • Variable = 9
   • Data Size = 1 byte dec
   • Desired Value =  [1 – 99 (seconds) or 0 (instant on/off)]
6. Click on Save Changes

Send us a message if you run into any issues!