Adjust the advanced settings for the ZEN52 Double Relay to suit your installation!
The ZEN52 Double Relay is integrated with the latest JS integration of Home Assistant, so that once included, you should have access to all of its advanced settings. If you aren't on the JS integration yet, Home Assistant currently recommends handling Z-Wave devices through the new Z-Wave JS integration since all others have essentially been abandoned and / or discontinued.
All of the ZEN52's advanced settings should be available, but since it is in beta release, it may still need to be integrated for certain settings and parameters. There is another way to make adjustments to your sensor's settings in the meantime.
You can now change any parameter manually on the JS Z-Wave integration for Home Assistant.
In the Z-Wave JS UI panel:
- Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
- You can enter the data according to the product documentation and click SET for the parameter to be updated.
Let us know if you need any help adjusting the parameters!
