Including a device to your Z-Wave system is also called adding or pairing.   

You'll need to include your ZSE41 sensor to your network before mounting it in its final location. 

To auto-include your ZSE41 Open | Close XS Sensor:

1. Put your Z-Wave hub into inclusion/pairing mode (see your hub's manual for instructions since each brand is different). If you’re using an S2 hub, it may ask you to enter the DSK key printed on the back cover sticker to complete secure inclusion
2. The LED indicator will start blinking for around 10 seconds and the sensor will join the network automatically

To manually include your ZSE41 Open | Close: 

1. Put the Z-Wave hub into inclusion/pairing mode (see your hub's manual for instructions since each brand is different)
2. Click the Z-Wave button 3 times quickly.
3. The new device should appear on your hub's device list

If you've tried auto and manual inclusion but find the ZSE41 sensor is not including, please being by trying to exclude the device, then including again.

We're happy to help answer any questions you may have! Please let us know!