Which Z-Wave hub systems is my ZEN76 S2 Switch compatible with?
The ZEN76 was verified as compatible with the following Z-Wave systems:
- Z-Box Hub (recommended for all Zooz products)
- 2GIG (no advanced settings available)
- Abode
- ADT Pulse (no advanced settings available)
- Almond (Securify)
- Fibaro Home Center 2
- Fibaro Home Center Lite
- Home Assistant (Z-Wave JS)
- HomeSeer (Z-Wave Plus or Z-Wave JS Front End)
- Homey (Zooz App for Homey)
- Hubitat
- InControl
- Indigo
- ISY994Zw
- openHAB
- Open Z-Wave
- Piper (no advanced settings - on/off control only)
- Ring (no advanced settings or scene control)
- SmartThings Hub (custom device handler needed to access advanced settings available here)
- Staples Connect DLink (no advanced settings - on/off control only)
- Wink and Wink 2 (no advanced settings)
If you've tried the ZEN76 on a Z-Wave system other than those listed above, and confirmed it works well for you, please send us a message! We'll be happy to update the ZEN76 compatibility list.
Will this device work with my alarm panel?
Yes, but with limited access to advanced settings.
Most alarm panels, like Alarm.com, generally support single switches, door locks, select thermostats, and other approved devices on their compatibility list. We recommend reaching out to your alarm panel provider to confirm compatibility and check for any upcoming device integrations.
Since the device follows the Z-Wave protocol and is Z-Wave certified, integration is dependent on your alarm panel provider. Unfortunately, while we can request integration, we don’t have control over whether the device is fully recognized—this would need to be supported by your alarm panel provider.
For more details on alarm panel compatibility, click here.
Can I connect the device directly to my Amazon Alexa, Google Home, or other smart speaker?
No. Smart speakers like Alexa or Google are not equipped with a Z-Wave chip and are not Z-Wave gateway controllers. Without a compatible Z-Wave hub, no Z-Wave products will not function correctly with Alexa or Google alone.
However, if your Z-Wave hub supports a Smart speaker integration (like Z-Box, SmartThings, and Hubitat do), this would allow voice control of your Z-Wave devices from your smart speakers.
Get in touch with us if you're not sure the ZEN76 will work with your hub!
