How to Add Your ZEN71 On/Off Switch to your Z-Wave System - Zooz Support Center

Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.

Home > Light Switches > ZEN71 On/Off Switch > ZEN71 & Your Z-Wave Hub > How to Add Your ZEN71 On/Off Switch to your Z-Wave System

How to Add Your ZEN71 On/Off Switch to your Z-Wave System

Once your ZEN71 is installed and working manually, it's time to pair it to your Z-Wave hub!

By pairing or including the switch, we mean adding or connecting it. Here's how to include your On/Off Switch to your Z-Wave system:

1. Put your Z-Wave controller into inclusion mode
2. Tap the upper paddle of the switch 3 times very quickly to finalize the inclusion process
3. A new on/off device will appear on your controller's device list

If you try including the switch and find it doesn't add to your system, here's what to try first.

* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.

Let us know if you have any questions during the process! We'll be happy to help.

Feedback

0 out of 0 found this helpful

Need additional information

Hard to understand

Inaccurate/irrelevant content

Missing/broken link

Have you tried our virtual assistant chatbot? This AI tool can help you find answers from thousands of articles in our Knowledge Base quickly. Find it in the bottom righthand corner of the page.

Need more help? Our friendly team is ready to help you with any questions or concerns you may have about Zooz devices. Click here to submit a support ticket.

Are your devices registered? Extended warranty and firmware access is available for registered Zooz customers. Click here to submit your registration form.

Find the latest Zooz devices and great Z-Wave deals at The Smartest House.