This is product is discontinued and replaced with the ZEN73. What does that mean?

You'll be able to control it remotely out of the box and add it to custom Robots. 

However, you won't be able to customize the switch with its advanced setting - this is a limitation in Wink's interface. The same applies for other Z-Wave Plus devices with advanced options. Regardless, you'll still be able to take advantage of the switch's most important functionality: quick and reliable remote on/off control. Here's how to add your switch to Wink:

1. Click on Hubs 
2. Click on Settings (the three dots in the upper right corner)
3. Click on your hub (most likely named Wink Hub)
5. Scroll down to Settings and click on Z-Wave Controls
6. Click on Inclusion Mode
7. Toggle the switch UP 3 times quickly
8. Rename your switch and start automating!

If you've tried including the switch to Wink but it's just not working out, here's what to try.

If you have any questions about the process above or want to know more about Wink's functionality, reach out to us! We're here to help.