Is your ZEN54 0-10V Dimmer successfully included but showing offline in Home Assistant? Is it unresponsive to commands from the hub? Try a network heal!
The exact range for any Z-Wave device is determined by the specific structure of your home and the strength of your mesh network. Large furniture, thick walls, metal elements and certain types of glass can shorten range. If you're seeing connectivity issues, give the network heal a try, as this will refresh the connections between your hub and devices to ensure that he hub can devise the most efficient route to each device.
- Click on the Z-Wave Control Panel in Home Assistant
- Under Z-Wave Network Management, click Heal Network
If your dimmer is still not connecting after healing the network, give these tips a try:
- Try excluding and re-including the device from your target location. It's possible that the hub hasn't found the best communication route to the device; exclusion from the target location can help it form a better route.
- If it's still not connecting, bring the device and the hub closer together to rule out any range issues.
If none of the above helps, give a factory reset a try.
- Click the Z-Wave button once and immediately after, press and hold it down for 15 seconds.
- The LED indicator will flash red during the process and turn solid red for 3 seconds to confirm successful reset.
After resetting the unit, follow the same inclusion process as before.
Still having trouble with your device? Send us a message so that we can help troubleshoot the issue.
