ZEN54 0-10V Dimmer Change Log - Zooz Support Center

Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.

Home > Light Switches > ZEN54 0-10 V Dimmer > ZEN54 0-10V Dimmer Change Log

ZEN54 0-10V Dimmer Change Log

Here is a list of the changes and updates we made to the ZEN54 0-10V Dimmer so far.

VER. 1.0 (released 2/2023)

Original release.
Hardware:

700 Series Z-Wave chip
Pigtail wires for easy installation

Firmware: 1.20

Set minimum and maximum brightness levels
Z-Wave Long Range ready
SmartStart for easy and secure inclusion

Firmware: 1.30 (released 5/2023 as OTA)

Added advanced parameters 15 and 16 for the Physical Ramp Rates. See all settings here.
Added advanced parameters 17 and 18 for the Z-Wave Ramp Rates. See all settings here.

Your 0-10 V Dimmer can be updated via OTA firmware updates, you can access all firmware files here once you register your product and create an account here. Questions? Just reach out to our support!

Feedback

0 out of 0 found this helpful

Need additional information

Hard to understand

Inaccurate/irrelevant content

Missing/broken link

Have you tried our virtual assistant chatbot? This AI tool can help you find answers from thousands of articles in our Knowledge Base quickly. Find it in the bottom righthand corner of the page.

Need more help? Our friendly team is ready to help you with any questions or concerns you may have about Zooz devices. Click here to submit a support ticket.

Are your devices registered? Extended warranty and firmware access is available for registered Zooz customers. Click here to submit your registration form.

Find the latest Zooz devices and great Z-Wave deals at The Smartest House.