Inclusion is the process of connecting a device to your Z-Wave hub; it is also known as adding or pairing a device. 

Simply plug in your ZEN04 and ensure it is working manually, then follow the simple steps below to include the ZEN04 Smart Plug to your Z-Wave hub.

 Here are the steps to add the device to your system: 

1. Plug the ZEN04 Smart Plug into the grounded 120VAC receptacle you plan to use it with
2. Put your Z-Wave hub into inclusion mode (see your controller's device manual, as each brand is different)
3. Press and release the Z-Wave button 3 TIMES QUICKLY
4. The LED indicator will start flashing blue to confirm inclusion mode and turn green for 1 second once inclusion is completed.

Once the plug is paired, you'll be able to create rules for it, control it remotely, and customize it via the advanced settings.

* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the side of the plug.

Trouble including the ZEN04 to your Z-Wave network? Start by trying exclusion, which acts as a soft Z-Wave reset for the device, often resolving any connectivity or configuration issues.. 

Send us message if you have any questions or are having any issues with your Smart Plug!