Once your ZEN75 Heavy Duty Switch is installed and working manually, it's time to pair it to your Z-Wave hub!  

By pairing or including the switch, we mean adding or connecting it. Here's how to include your ZEN75 Heavy Duty Switch to your Z-Wave system:

1. Put your Z-Wave controller into inclusion mode (see your specific controller instructions on how to do so)
2. Tap the UPPER paddle 3 times as quickly as possible; the LED indicator will blink blue to signal communication and turn green for 3 seconds if inclusion is successful or turn red for 3 seconds if the pairing attempt fails.

3. If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.
4. A new on/off device will appear on your controller's device list

If you try including the switch and find it doesn't add to your system, here's what to try first. 

Let us know if you have any questions during the process! We'll be happy to help.