This is product is discontinued and does not have a replacement yet. New product in development. What does that mean?

Try the suggestions below if your ZSE19 Multisiren goes offline or is unresponsive to Z-Wave commands:

Your ZSE19 Multisiren is a Z-Wave Plus device that has range of 100 feet line of sight. Even so, interferences like metal elements and thick walls can affect the device's range. Ultimately range is determined by the specific structure of your home and the strength of your mesh network. If you're seeing connectivity issues with your sensor, here are several things to try:

1. If there's a way to refresh your Z-Wave network, start with this This will help configure your network and help your hub find the most effective communication route to the siren. 

2. Try excluding and re-including the siren directly from the installation location. Similar to the idea behind network refresh, it's possible that the hub hasn't found the most efficient communication route to the device. This sometimes happens when you include a device near the hub and then move it away to be installed.

3. Try bringing the siren closer to your hub and exclude it and re-include it from the new spot. If the device is added, stays connected, and is responsive to remote commands, it's possible the initial location was out of the hub's range or there are too many interferences in that area.

If you tried all our suggestions and nothing has helped, don't hesitate to reach out to our team!