You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
Home > Hubs & Network > ZST10 700 S2 USB Stick > SerialAPI Functions for ZST10
SerialAPI Functions for ZST10
print icon

This is product is discontinued and replaced with ZST39.

What does that mean?

The S2 USB Stick acts as an extension to your smart home software adding Z-Wave Plus communication to the network. It can act as the primary or secondary controller and will perform many functions in either role. Sending commands to Z-Wave devices is just one of them. Below, you can find the full list of tasks the ZST10 stick can take upon itself when managing your Z-Wave network.

Any of the functions needs to be initiated by the software you're using so depending on the capabilities of your system, you may have access to all or just part of the SerialAPI functions.

SUPPORT_ZW_GET_ROUTING_MAX 
SUPPORT_ZW_GET_SUC_NODE_ID 
SUPPORT_ZW_GET_VERSION 
SUPPORT_ZW_GET_VIRTUAL_NODES 
SUPPORT_ZW_IS_FAILED_NODE_ID 
SUPPORT_ZW_IS_NODE_WITHIN_DIRECT_RANGE 
SUPPORT_ZW_IS_PRIMARY_CTRL 
SUPPORT_ZW_IS_VIRTUAL_NODE 
SUPPORT_ZW_IS_WUT_KICKED 
SUPPORT_ZW_NEW_CONTROLLER 
SUPPORT_ZW_RANDOM 
SUPPORT_ZW_REDISCOVERY_NEEDED 
SUPPORT_ZW_REMOVE_FAILED_NODE_ID 
SUPPORT_ZW_REMOVE_NODE_FROM_NETWORK 
SUPPORT_ZW_REPLACE_FAILED_NODE 
SUPPORT_ZW_REPLICATION_COMMAND_COMPLETE 
SUPPORT_ZW_REPLICATION_SEND_DATA 
SUPPORT_ZW_REQUEST_NETWORK_UPDATE 
SUPPORT_ZW_REQUEST_NEW_ROUTE_DESTINATIONS 
SUPPORT_ZW_REQUEST_NODE_INFO 
SUPPORT_ZW_REQUEST_NODE_NEIGHBOR_UPDATE 
SUPPORT_ZW_RF_POWER_LEVEL_GET 
SUPPORT_ZW_RF_POWER_LEVEL_REDISCOVERY_SET 
SUPPORT_ZW_RF_POWER_LEVEL_SET 
SUPPORT_ZW_SEND_DATA 
SUPPORT_ZW_SEND_DATA_ABORT 
SUPPORT_ZW_SEND_DATA_BRIDGE 
SUPPORT_ZW_SEND_DATA_META 
SUPPORT_ZW_SEND_DATA_META_BRIDGE 
SUPPORT_ZW_SEND_DATA_META_MR 
SUPPORT_ZW_SEND_DATA_MR 
SUPPORT_ZW_SEND_DATA_MULTI 
SUPPORT_ZW_SEND_DATA_MULTI_BRIDGE 
SUPPORT_ZW_SEND_NODE_INFORMATION 
SUPPORT_ZW_SEND_SLAVE_DATA 
SUPPORT_ZW_SEND_SUC_ID 
SUPPORT_ZW_SEND_TEST_FRAME 
SUPPORT_ZW_SET_DEFAULT 
SUPPORT_ZW_SET_EXT_INT_LEVEL 
SUPPORT_ZW_SET_LEARN_MODE 
SUPPORT_ZW_SET_LEARN_NODE_STATE 
SUPPORT_ZW_SET_PROMISCUOUS_MODE 
SUPPORT_ZW_SET_RF_RECEIVE_MODE 
SUPPORT_ZW_SET_ROUTING_INFO 
SUPPORT_ZW_SET_ROUTING_MAX 
SUPPORT_ZW_SET_SLAVE_LEARN_MODE 
SUPPORT_ZW_SET_SLEEP_MODE 
SUPPORT_ZW_SET_SUC_NODE_ID 
SUPPORT_ZW_SET_WUT_TIMEOUT 
SUPPORT_ZW_SUPPORT9600_ONLY 
SUPPORT_ZW_TYPE_LIBRARY 
SUPPORT_ZW_WATCHDOG_DISABLE 
SUPPORT_ZW_WATCHDOG_ENABLE 
SUPPORT_ZW_WATCHDOG_KICK 
SUPPORT_ZW_WATCHDOG_START 
SUPPORT_ZW_WATCHDOG_STOP 
SUPPORT_ZW_NVR_GET_VALUE 
SUPPORT_FUNC_ID_CLEAR_TX_TIMERS 
SUPPORT_FUNC_ID_GET_TX_TIMERS

Feedback
3 out of 48 found this helpful

Have you tried our virtual assistant chatbot? This AI tool can help you find answers from thousands of articles in our Knowledge Base quickly. Find it in the bottom righthand corner of the page.

Need more help? Our friendly team is ready to help you with any questions or concerns you may have about Zooz devices. Click here to submit a support ticket.

Are your devices registered? Extended warranty and firmware access is available for registered Zooz customers. Click here to submit your registration form.

Find the latest Zooz devices and great Z-Wave deals at The Smartest House.
 
scroll to top icon