Follow the steps below to pair your ZEN71 Switch to your Vera hub:
- Select the Devices tab in your Vera app. Then click on the gray "+ Add Device" button
- Choose Generic Z-Wave Device from the device list
- Tap the UPPER paddle 3 times quickly (The LED indicator should flash in blue to confirm it has signal communication. Once paired, it will flash green 3 times. If inclusion fails, it will flash red 3 times.)
- 4. A new Z-Wave switch will appear on your device list
* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.
*Updated Disclaimer: We've seen several issues with Vera hubs properly recognizing and integrating 700 & 800 series Z-Wave devices. It seems that the mios and Vera systems are no longer updated or supported for new features and Z-Wave libraries as they're replaced with the new Ezlo platform instead.
Unfortunately, we've had to remove Vera hubs from our compatibility lists for this reason. We're not able to modify devices to accommodate older discontinued systems like these as we need to follow the current DSK for our devices to pass Z-Wave certifications and work well with active platforms that are up to date. We apologize for any inconvenience.
Let us know if you're having trouble or have any questions!
