You'll have your ZEN71 Switch paired with SmartThings in no time!

To access all of the advanced settings available for the 700 Series On/Off Switch, you'll want to install the custom Edge driver with the instructions located here.

With the driver installed, you can go ahead and include the ZEN71 to SmartThings:

1. Tap the plus icon in the home screen
2. Tap Device
3. Tap "Scan nearby" (in the corner of the screen)
4. While the app says "Scanning...", tap the UPPER paddle 3 times as quickly as possible
   • The LED indicator should flash in blue to confirm it has signal communication. Once paired, it will flash green 3 times. If inclusion fails, it will flash red 3 times.
5. The app will indicate when the device connects
6. Tap Edit to rename the device, and tap Done to save the name
7. Tap Done to complete the setup

* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.

Let us know if you have any questions, we'll be happy to help!