The ZEN71 700 series Switch comes with a lot of nifty advanced features, like an auto timer and on/off status after power failure.

Below are the steps to change parameters in your Vera interface; we took on/off status recovery as an example, but the same steps apply for any other setting. The rest of the parameter details can be found here. Unfortunately, Vera doesn't currently support the scene control (multi-tap) functionality of our switches.

How to change an advanced setting parameter for your ZEN71 in Vera:

1. Open your Vera online interface (the browser dashboard, not the app)
2. Click on the Zooz ZEN71 On/Off Switch
3. Go to Device Options
4. Click on Add configuration settings
5. Put in the following to change on/off status after power failure:
   • Variable = 8
   • Data Size = 1 byte dec
   • Desired Value =  [0 – forced to OFF (regardless of state prior to power outage); 1 – forced to ON (regardless of state prior to power outage); 2 – remembers and restores on/off status after power failure (default)]
6. Click on Save Changes

Questions about the ZEN71's advanced options? Let our team know!