How to Program Your ZEN32 Scene Controller on Hubitat

While not needed for basic operation, you may opt in for the community custom driver created by bertabcd1234 to gain access to the full multi-tap functionality and more advanced settings.

At the moment, you'll only be able to use the button controller features of the device since direct association is not available on Hubitat yet. The platform only supports a single or double press, held, and released triggers for buttons so the documented 3, 4, or 5-taps will only be exposed in Hubitat once you install the community driver. Even with the community driver, Direct Association is not available for the ZEN32 on Hubitat; this is a platform limitation.

The easiest way to program the Scene Controller is with the Simple Automation Rules app:

Click on Apps in the side menu
Click on "+ Add Built-in App" in the top right corner
Select Simple Automation Rules
Click on the Simple Automation Rules app under Apps now that you've added it
Click on Create New Simple Automation Rule
Select the devices you would like to trigger with one of the ZEN32 buttons under Which lights or switches do you want to automate?
Click Update
Under, How do you want to trigger it?, select Button Pushed/Held
Under What do you want to do?, select the action for the button (choose Toggle if you want to turn a device on and off with the same button)
Under Which button?, select the button on the Scene Controller you would like to use to control the devices selected above (choose the main ZEN32 device if you would like to use the main switch button) and click Update or select the Zooz ZEN32 Scene Controller device and enter the button number under Which button number? (see the buttons mapped for the community driver here)
Select the button trigger under Turn on when (or other action you chose for the device). Choose Pushed for a single click.
Add any additional conditions under Restrictions and click Done.

You can also program the Scene Controller in the more advanced Rule Machine app that will give you the opportunity to use the LED indicators on the buttons as actions / alerts for other devices or scenarios in your network.

Here is how to program the LED indicators as action to the trigger of your choice:

In the advanced settings on the ZEN32 Scene Controller, make sure that the LED indicators for all buttons you want to control are set to always ON
Click on Apps in the side menu
Click on "+ Add Built-in App" in the top right corner (or skip ahead if you already have Rule Machine installed)
Click on Rule Machine
Follow the prompts on the screen to select your trigger
Under action, choose Set Variable, Mode or File, Run Custom Action > Run Custom Action > choose "Button" under "Select capability of action device" > select the ZEN32 from the device list > choose "setLED" under "Select custom command"
Under Parameter Type select NUMBER and enter the number of the button you'd like the LED Indicator to be activated on (see the buttons mapped for the community driver here)
Click "Add another parameter" and select STRING and the color you'd like the LED to turn on to (for example "blue")
Click "Add another parameter" again and select NUMBER then enter the brightness level of the LED indicator you'd like to trigger (enter a number between 1 and 99)
Click "Done editing action" and follow the prompts on the screen to complete the automation in Rule Machine until it's saved.

Just choose the custom command set LED as the action for your smart rule and follow the prompts on the screen to complete the set-up.

Do you have any more questions about programming the Scene Controller on Hubitat? Please reach out to us anytime!