How to Program Your ZEN34 Remote Switch on Z-Box Hub
Pick your favorite way to program the ZEN34 from the options below! From scene control (multi-tap) to direct association, programming the ZEN34 Remote Switch on the Z-Box Hub is simple and intuitive. To program the multi-tap functions on the ZEN34, you can follow the standard block scene creation flow , or you can …
How To Program Scene Control On Your Zooz Light Switches In the Z-Box Hub
The Z-Box Hub makes it easy to add an action to any of the central scene triggers with handy shortcuts and a powerful scene creation tool. Here is how to program multi-tap triggers for your switches in the Z-Box Hub interface: 1. Make sure you're logged in to the WEB UI with local connection (same wifi network as y…
How To Program Scene Control On Your Zooz Light Switches In SmartThings
The scene control functionality is available on SmartThings only if you're using a custom driver for your Zooz switches. You only have to install one custom driver for any wall switch or dimmer model on SmartThings and you only need to do it once, regardless of how many switches you're going to add. Simply follow th…
How To Program Scene Control On Your Zooz Light Switches In Hubitat
We recommend using your switches with one of the custom drivers on Hubitat for best experience with scene control. Click here to install one for your switch (it applies to all of the on/off models) and click here to install one for your dimmer (applies to all Zooz dimmers) before you try adding them to your hub. …
How to Program Your ZEN32 Scene Controller on Vera
The ZEN32 Scene Controller is not fully supported by Vera at the moment. While you'll be able to use it as a light switch (connected to the main button), the only way to assign actions to the small remote control buttons is now through direct association. The limitation with direct association programming is that yo…
How To Program Scene Control On Your Zooz Light Switches
Scene control is a bonus feature on Zooz light switches that allows you to use them as smart remote controls. You can program each paddle for multi-tap triggers to turn on different connected devices in your home or even change the mode on your smart thermostat. This functionality is available only if your Z-Wave hub…
How to Program Your ZEN32 Scene Controller on SmartThings
Once you've installed the Edge driver for your Scene Controller and added the device to your hub, it's time to program it. There are a few different ways you can assign actions to the remote control buttons. You can use the 4 remote buttons as well as the main switch button to trigger other devices and scenes in y…
How to Program Your ZEN32 Scene Controller on Hubitat
While not needed for basic operation, you may opt in for the community custom driver created by bertabcd1234 to gain access to the full multi-tap functionality and more advanced settings. At the moment, you'll only be able to use the button controller features of the device since direct association is not availa…
How to Program Your ZEN34 Remote Switch on Home Assistant
You'll be able to control other devices and trigger scenes from the Remote Switch by using direct association or central scene commands. The official Home Assistant Z-Wave add-on does not have association support at the moment; in order to use Direct Association you need to install the Z-Wave JS UI add-on , whic…
