You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.

Showing articles from Direct Association tag

How To Set Up Direct Association on Hubitat

Z-Wave Direct Association is a feature of Z-Wave technology that allows for direct communication between Z-Wave devices without needing to go through the Z-Wave hub/controller. With Direct Association, devices can be linked together so that one device can trigger actions on another device within the Z-Wave network, e…

How to Program Your ZEN34 Remote Switch on Z-Box Hub

Pick your favorite way to program the ZEN34 from the options below! From scene control (multi-tap) to direct association, programming the ZEN34 Remote Switch on the Z-Box Hub is simple and intuitive. To program the multi-tap functions on the ZEN34, you can follow the standard block scene creation flow , or you can …

How To Set Up Direct Association on SmartThings

Z-Wave Direct Association is a feature of Z-Wave technology that allows for direct communication between Z-Wave devices without needing to go through the Z-Wave hub/controller. With Direct Association, devices can be linked together so that one device can trigger actions on another device within the Z-Wave network, e…

How To Set Up Direct Association on Home Assistant

Direct association establishes a direct connection between two Z-Wave devices, where one serves as the trigger and the other as the recipient of that trigger. Essentially, one Z-Wave device transmits a message directly to another, bypassing the hub. These commands are typically straightforward and unconditional, such…

How To Program Direct Association on Zooz Devices

We get a lot of questions about Z-Wave direct association. It can be a handy tool to link two Z-Wave devices together but it's important to remember that this method has its limitation and it's not available on all smart home platforms. In this guide, we go over the main features, benefits, and challenges of using di…

How to Program Your ZEN32 Scene Controller on Vera

The ZEN32 Scene Controller is not fully supported by Vera at the moment. While you'll be able to use it as a light switch (connected to the main button), the only way to assign actions to the small remote control buttons is now through direct association. The limitation with direct association programming is that yo…

How to Create Direct Association for Your ZEN34 Remote Switch in Vera

While the ZEN34 is not supported by Vera as of 11/2020, you should be able to include it to your system, and program it via direct association! The direct association method works between 2 Z-Wave devices included with the same security level only. You will be able to program the ZEN34 to control other Z-Wave device…

How to Program Your ZEN34 Remote Switch on Home Assistant

You'll be able to control other devices and trigger scenes from the Remote Switch by using direct association or central scene commands. The official Home Assistant Z-Wave add-on does not have association support at the moment; in order to use Direct Association you need to install the Z-Wave JS UI add-on , whic…

scroll to top icon