Follow the steps below to add your ZEN73 Switch to the Vera hub:
- Select the Devices tab in your Vera app. Then click on the gray "+ Add Device" button
- Choose Generic Z-Wave Device from the device list
- Toggle the switch UP 3 times quickly (the LED indicator should flash blue and once the switch is paired, it will flash green 3 times. If inclusion fails, it will flash red 3 times.)
- A new Z-Wave switch will appear on your device list: rename it and start automating!
* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.
*Updated Disclaimer: We've seen several issues with Vera hubs properly recognizing and integrating 700 & 800 series Z-Wave devices. It seems that the mios and Vera systems are no longer updated or supported for new features and Z-Wave libraries as they're replaced with the new Ezlo platform instead.
Unfortunately, we've had to remove Vera hubs from our compatibility lists for this reason. We're not able to modify devices to accommodate older discontinued systems like these as we need to follow the current DSK for our devices to pass Z-Wave certifications and work well with active platforms that are up to date. We apologize for any inconvenience.
Let us know if you have any questions or experience issues adding the switch to your system.
