Once you have your ZEN17 wired up and ready to go, it's time to include it to your Z-Wave system!

There are a few ways to describe it, but inclusion is a common term for pairing or adding a device to your Z-Wave system.

Here are the steps for including your ZEN17 Universal Relay: 

1. Make sure that the unit is powered by a proper 12-24 V or USB C power supply.
2. Put your hub into inclusion/pairing mode in your app's interface (each hub is different, so refer to the hub's manual if you're unsure about the process)
3. Click the Z-Wave button on the device 3 times very quickly (LED indicator will start flashing)
4. Your Z-Wave system should confirm the device was successfully added.

* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the device.

If you're having trouble including your device, the first thing you should try is excluding the unit and then giving inclusion another go.

Have any questions about the inclusion process? Please let us know! Our team will be happy to help.