ZSE11 Q Sensor Change Log
Here is a list of updates we made to the ZSE11 Q Sensor so far:
VER. 1.0 (released 04/2021)
Original release
Hardware:
- 500 Series Z-Wave chip
- Mounting bracket included
- 2 CR123A batteries included
Firmware: 1.09
-
S2 Security
-
Advanced settings to adjust motion, temperature, humidity, and light reporting
-
Due to hardware changes made in the following versions, the 1.09 version cannot be updated using the later firmware files
VER. 1.10 (released 10/2021)
Hardware:
- Optimized motion and temperature reporting
Firmware: 1.10
- Cannot be used on the 1.09 version due to hardware changes
- Optimized motion and temperature reporting
VER. 1.11 (released as OTA in 11/2021)
Firmware: 1.11
- Fixed a lux reading bug where the sensor would report 0 in very bright settings
VER. 1.30 (released as OTA in 8/2022)
Firmware: 1.30
- Fixed an issue with S2 Authenticated security inclusion
VER. 800LR (released 04/2024)
Hardware: 2.0
- 800 Series Z-Wave chip
Firmware: 2.0
- Long Range ready
- Removed Advanced Parameter 16: Binary Sensor Report. The 800 series Z-Wave chip has abandoned the Sensor Binary Reports and uses Notification Command Class only, according to Z-Wave specification.
- Added Advanced Parameter 20 - Enable/Disable the Vibration Sensor. See all settings here.
- Added Advanced Parameters 21,22, and 23 for Lux, Temperature, and Humidity sensors checking interval time. See all settings here.
- Added Advanced Parameters 173, 174, and 175 for Lux, Temperature, and Humidity sensors reporting frequency time. See all settings here.
- Added Advanced Parameters 201, 202, and 203 for Lux, Temperature, and Humidity sensors offsets. See all settings here.
The ZSE11 on firmware 1.10 or higher can be updated via OTA firmware updates, here is how to do that. You can access all firmware files here once you register your product and create an account here. Questions? Please reach out to our support team who's here to help you 7 days a week!
