Here is a list of updates we made to the ZEN05 model so far: VER. 1.0 (released 7/2022) Original release. Hardware: * Weather resistant housing (IP65) * Angled plug to free up the second outlet * 700 Series Z-Wave chip for extra range and reliable communication Firmware: 1.10 * Quick on/off wireless control …
This is product is discontinued and does not have a replacement yet. New product in development. What does that mean? Here is a list of the changes and updates we made to the ZEN31 RGBW Dimmer so far. VER. 1.0 (released 12/2019) Original release. Hardware: * 4-channel inputs for on/off and momentary wall swit…
Here is a list of updates we have made to the ZSE18 Motion Sensor so far: VER. 1.0 (released 6/2018) Original release Hardware: * 500 Series Z-Wave chip * Mounting bracket included * 1 CR123A battery included * Ability to power the sensor with a micro USB cable and power adapter (NOT included) Firmware: 1.0 …
Here are the changed and updates we made to the ZEN73 On/Off Toggle Switch 700 so far. VER. 1.0 (released 4/2021) Original release. Hardware: * Implemented simple direct 3-way solution (wires like the ZEN76 model and NOT like the old ZEN23 model in 3-way and 4-way set-ups) * 700 Series Z-Wave chip * Just 1.16…
Here is a list of updates we made to the ZEN74 700 Series Toggle Dimmer so far: VER. 1.0 (released 3/2021) Original release Hardware * 700 series Z-Wave chip * New wiring for 3-way and 4-way set-ups compared to the ZEN24 model (always follow the diagrams in the manual ) * No heatsink tabs and only 1.16" deep …
Here is a list of updates we made to the ZSE11 Q Sensor so far: VER. 1.0 (released 04/2021) Original release Hardware: * 500 Series Z-Wave chip * Mounting bracket included * 2 CR123A batteries included Firmware: 1.09 * S2 Security * Advanced settings to adjust motion, temperature, humidity, and light report…
Here is a list of the changes and updates we made to the ZAC36 Titan Water Valve Actuator so far. VER. 1.0 (released 8/2021) Original release. Hardware: * 700 Series Z-Wave chip * Smart auto-calibration process * IP 66 outdoor rating * Included 4.75' water leak probe * Installation Requirements: 0.5" - 1.25…
This is product is discontinued and replaced with ZEN04 . What does that mean? Here is a list of updates we made to the ZEN06 model so far. VER. 1.0 (released 10/2016) Original release. Hardware: * Power monitoring, 2 USB ports (no Z-Wave control or reports), smart LED ring Firmware: 1.01 * Overload protec…
This is product is discontinued and replaced with the ZEN74 . What does that mean? Here are the changes and updates we made to the ZEN24 model so far. VER. 1.0 (released 12/2016) Original release. Hardware: * Did NOT include neutral jumper * Implemented the classic 3-way functionality with a dedicated add-o…
Here is a list of the updates we applied to the ZEN52 Double Relay so far. VER. 1.0 (released 1/2022) Original release. Hardware: * 700 Series Z-Wave chip * Single pole or direct 3-way capability * Pigtail wires for easy installation * Wiring limitation: in certain scenarios with too much noise on the wires,…