Through Home Assistant, you can access all of the ZAC36's advanced settings.
The Valve Actuator is integrated with the JS integration of Home Assistant, giving you easy access to all of its advanced settings once paired to the network. If you aren't on the JS integration yet, Home Assistant currently recommends handling Z-Wave devices through the new Z-Wave JS integration since all others have essentially been abandoned and / or discontinued.
If for some reason certain settings are not appearing for you, or are not saving the updated value, you can try changing the settings another way.
You can now change any parameter manually on the JS Z-Wave integration for Home Assistant.
It needs to be done in Z-Wave JS UI and it’s not possible to do this within HA directly at the moment:
- Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
- You can enter the data according to the product documentation and click SET for the parameter to be updated.
- If you have a battery-powered device, you'll need to wake it up by performing the same activation sequence as during inclusion.
Let us know if you have any questions! We'll be happy to help.
