Which Z-Wave hub systems are compatible with my ZEN77?
The ZEN77 was verified as compatible with the following Z-Wave systems:
- Z-Box Hub (recommended for all Zooz products)
- 2GIG (no advanced settings available)
- Abode (no advanced settings available)
- ADT Pulse (no advanced settings available)
- Almond (Securify) (no advanced settings available)
- Fibaro Home Center 2
- Fibaro Home Center Lite
- Home Assistant (Z-Wave JS)
- HomeSeer (Z-Wave Plus or Z-Wave JS Front End)
- Homey (Zooz App for Homey)
- Hubitat
- InControl
- ISY
- openHAB
- Open Z-Wave
- Ring (no advanced settings or scene control)
- SmartThings Hub (need to install custom device handler for complete access to advanced settings - shown here)
- Wink and Wink 2 (no advanced settings)
If you've tried the ZEN77 Dimmer on a Z-Wave system other than those listed above, and confirmed it works well for you, please let us know! We'll be happy to include it on the compatibility list for the ZEN77.
Will this device work with my alarm panel?
Yes, but with limited access to advanced settings.
Most alarm panels, like Alarm.com, generally support single switches, door locks, select thermostats, and other approved devices on their compatibility list. We recommend reaching out to your alarm panel provider to confirm compatibility and check for any upcoming device integrations.
Since the device follows the Z-Wave protocol and is Z-Wave certified, integration is dependent on your alarm panel provider. Unfortunately, while we can request integration, we don’t have control over whether the device is fully recognized—this would need to be supported by your alarm panel provider.
For more details on alarm panel compatibility, click here.
Can I connect the device directly to my Amazon Alexa, Google Home, or other smart speaker?
No. Smart speakers like Alexa or Google are not equipped with a Z-Wave chip and are not Z-Wave gateway controllers. Without a compatible Z-Wave hub, no Z-Wave products will not function correctly with Alexa or Google alone.
However, if your Z-Wave hub supports a Smart speaker integration (like Z-Box, SmartThings, and Hubitat do), this would allow voice control of your Z-Wave devices from your smart speakers.
Need to verify your hub but it's not on the list? Get in touch!
