You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
announcement close button
Home > Smart Relays > ZEN52 Double Relay > ZEN52 Double Relay Change Log
ZEN52 Double Relay Change Log
print icon

Here is a list of the updates we applied to the ZEN52 Double Relay so far.

VER. 1.0 (released 1/2022)

Original release.
Hardware:

  • 700 Series Z-Wave chip
  • Single pole or direct 3-way capability
  • Pigtail wires for easy installation
  • Wiring limitation: in certain scenarios with too much noise on the wires, the wall switch wouldn't trigger the relay (most commonly when installed in a light fixture more than 30 feet from the wall switch)

Firmware: 1.10

  • 3 switch types to choose from (on/off toggle fixed to position, on/off toggle regular, momentary + impulse 3-way wiring mode for selected 3-way scenarios)

  • Smart bulb mode

  • Scene control (works best with momentary wall switches)

VER. 1.20 (released 3/2022 as OTA)

Firmware: 1.20

  • Fixed bug: Both external switches can be triggered at the same time now

VER. 1.30 (released 6/2022)

Hardware:

  • Fixed the wiring limitations for wall switches not triggering the relay in selected scenarios

Firmware: 1.30

  • Optimized performance in different wiring scenarios

VER. 1.40 (released 8/2022 as OTA)

Firmware: 1.40

  • Fixed reverse behavior for toggle switch with fixed action (always toggle up for on, always toggle down for off)

VER. 1.50 (released 3/2023)

Firmware: 1.50

  • Added Z-Wave Long Range

VER. 1.60 (released 4/2023 as OTA)

Firmware: 1.60

  • Fixed smart bulb behavior after a power outage: The actual status of the relay and the reported status of the relay are both restored correctly now

VER. 1.70 (released 8/2023 as OTA)

Firmware: 1.70

  • Removed the delay when controlling the ZEN52 from the external mechanical switch when parameter 27 is set to value 0 (disable external switch multiple click detection)
  • Fixed bug: Both external switches can be triggered at the same time now (when parameters 20 and 21 are set to values 0 - toggle switch)

 

Your Double Relay can be updated via OTA firmware updates, you can access all firmware files here once you register your product and create an account here. Do you need more help? Just reach out to our customer service team, we reply 7 days a week!

Feedback
0 out of 2 found this helpful

Have you tried our virtual assistant chatbot? This AI tool can help you find answers from thousands of articles in our Knowledge Base quickly. Find it in the bottom righthand corner of the page.

Need more help? Our friendly team is ready to help you with any questions or concerns you may have about Zooz devices. Click here to submit a support ticket.

Are your devices registered? Extended warranty and firmware access is available for registered Zooz customers. Click here to submit your registration form.

Find the latest Zooz devices and great Z-Wave deals at The Smartest House.
 
close button
scroll to top icon