The ZSE42 Water Leak XS Sensor is supported by the following Z-Wave systems:
- Z-Box Hub (recommended for all Zooz products)
- Ezlo
- Home Assistant (Z-Wave JS)
- HomeSeer (Z-Wave Plus or Z-Wave JS Front End)
- Homey (Zooz App for Homey)
- Hubitat (2.2.9 or higher)
- SmartThings
Will the ZSE42 work with Ring, since the Titan is supported?:
- No. Ring does not support binary sensors from other brands.
- When trying to use the ZSE42 sensors with the Titan on Ring, the Ring Auto Close functionality will only work with Ring Flood & Freeze Sensors, which are the only leak sensors currently fully integrated in the Ring Alarm system.
Will this device work with my alarm panel?
No. Alarm panels do not support binary sensors from other brands.
Most alarm panels, like Alarm.com, generally support single switches, door locks, select thermostats, and other approved devices on their compatibility list. We recommend reaching out to your alarm panel provider to confirm compatibility and check for any upcoming device integrations.
Since the device follows the Z-Wave protocol and is Z-Wave certified, integration is dependent on your alarm panel provider. Unfortunately, while we can request integration, we don’t have control over whether the device is fully recognized—this would need to be supported by your alarm panel provider.
For more details on alarm panel compatibility, click here.
Can I connect the device directly to my Amazon Alexa, Google Home, or other smart speaker?
No. Smart speakers like Alexa or Google are not equipped with a Z-Wave chip and are not Z-Wave gateway controllers. Without a compatible Z-Wave hub, no Z-Wave products will not function correctly with Alexa or Google alone.
However, if your Z-Wave hub supports a Smart speaker integration (like Z-Box, SmartThings, and Hubitat do), this would allow voice control of your Z-Wave devices from your smart speakers.
NOTE: If you don't see your Z-Wave controller on the list above, please get in touch with us before you purchase this product.
