Is your ZSE42 Water Leak XS Sensor offline or unresponsive to Z-Wave commands? Try the steps listed below:

Sometimes obstructions like metal elements and thick walls can cause interference with the sensor's communication. The range for the device is determined by the individual structure of your home and the strength of your mesh network. If you're seeing connectivity issues with your sensor, here are several things to try:

1. If there's a way to refresh your Z-Wave network, start here. This will configure your network and help your hub find the most effective communication route to the sensor. 

2. Try excluding and re-including the sensor directly from the installation location. it is possible that the hub hasn't found the most efficient communication route to the device. Occasionally, this happens when you include a device near the hub and then move it away to be installed.

3. Try bringing the sensor closer to your hub, then exclude it and re-include it from the new spot. If the device is added, stays connected, and is responsive to remote commands, it's possible the initial location was out of the hub's range, or there are too many interferences in that area.

Please don't hesitate to reach out to us with any questions!