You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.

Showing articles from ZEN17 tag

How to Use the ZEN17 Universal Relay as a Garage Door Opener on Hubitat

You can automate up to 2 garage doors with a single Universal Relay. Always check your local safety regulations and test the device thoroughly once you wire and program it to prevent accidental operation. You can use a wired NC contact sensor on the input side of the Universal Relay to receive open/close notification…

ZEN17 Universal Relay Specs

Here are the technical details for the Universal Relay: * Z-Wave Region:  US, CA, MX * Power:  12 - 24 V / USB C * Maximum Load:  NO relays: 20 A, NC Relays: 10 A * Range:  Up to 300 feet line of sight (or up to 1300 feet with Z-Wave Long Range enabled for ZEN17 800LR) * Installation and Use:  Indoor Only * …

Zooz SmartThings Edge Drivers

SmartThings is slowly transitioning from the legacy groovy platform to the new lua platform . This creates new challenges for seamless integration as well as access to key and advanced features of our devices. As usual, we're committed to providing the best possible experience to all of our customers, regardless of …

ZEN17 Universal Relay Change Log

Here is a list of the changes and updates we made to the ZEN17 Universal Relay so far. VER. 1.02 (released 3/2021) Original release. Hardware: * 2 x NO-C-NC relays and double inputs (dry contact + 12-24 V) * USB C cable included (power adapter sold separately) * 700 Series Z-Wave Chip Firmware: 1.02 * 4 swi…

ZEN17 Universal Relay Advanced Settings

Here is a full list of advanced settings (parameters) for ZEN17 Universal Relay: Some parameters were added in later firmware updates so please make sure you're on the latest firmware to have all of the settings below available.  You can view the change log for the ZEN17 here. On / Off Status After Power Failure P…

ZEN16 VS ZEN17: What's the Difference

There is a lot of smart home potential with the Zooz relay devices - so which model should you go with? Here are the main differences between the ZEN16 MultiRelay and the ZEN17 Universal Relay: * The ZEN16 has 3 NO relay while the ZEN17 has 2 NO-C-NC relays. * The switch inputs on the first version of the ZEN16 w…

How to Use the ZEN17 Universal Relay as a Garage Door Opener

You can automate up to 2 garage doors with a single Universal Relay. Please ensure you have verified the local safety regulations before installing the ZEN17. Always test the device meticulously once you have wired and programmed it to prevent accidental operation. To accurately monitor the status of your garage door…

scroll to top icon