The scene control functionality is available on SmartThings only if you're using a custom driver for your Zooz switches. You only have to install one custom driver for any wall switch or dimmer model on SmartThings and you only need to do it once, regardless of how many switches you're going to add. Simply follow these instructions (they'll work for any model) to have the driver installed. If your switch or dimmer is already added to SmartThings, you can assign the correct driver to the switch by clicking on the device tile > click the 3 dots in top corner > select Driver > select Different Driver in blue at the bottom of driver page > select the Zooz Switch driver.

First, make sure your device was recognized correctly and displays the correct model number in the app and Zooz Switch driver.

Enable scene control in the advanced parameters of the switch: click on the device in your ST app, click the 3 dots in the top right corner and click Settings. Scroll down to Scene Control and enable this function. Exit the settings.

Each paddle will appear as a possible trigger under "Device Status" in the SmartThings app built-in Routines tool.

To access it, click on the Routines item in the lower screen menu in your SmartThings app:

1. Create a new Routine by clicking on the + icon in the top right corner of the screen.
2. Click the +  button in the upper right of the screen.
3. Under If, please press the + button.
4. Select Device status as the trigger.
5. Select the Zooz switch to program the multi-tap triggers of your choice.
6. Select the button trigger (double tap, held, etc) you would like to use in this automation.
7. Click Save.
8. Add additional conditions to your automation under the If section or move on to the Then section.
9. Click on the + button to add the action you would like to trigger with the button of your choice.
   • If you want to turn a device on, simple click on Control devices
   • Select the target device from the list
   • Click Next
   • Select Turn on (or a different action of your choice)
   • Click Save.
10. You can add multiple devices or scenes to be fired by the same button trigger if you click the + button next to Then again and follow the prompts on the screen to add another action.
11. Once the trigger and action items look good, click Save and rename your automation if needed so you can easily find it among other smart rules you programmed using the Automation tool.
12. Click OK for the automation to be saved.

If you need to edit or delete your automation, simply open the Routines section from the lower screen menu in your SmartThings app. Tap once to edit it, press and hold to delete it.

Do you have more questions about programming scene control on your switch? Just reach out to us!