How to Access Advanced Settings for My ZSE41 Open | Close XS Sensor on SmartThings
With the SmartThings transition to a new platform (the lua platform ), the original Groovy custom device handlers are no longer supported. We have created new custom Edge drivers specifically for the lua platform. Please follow the instructions on how to install the driver. If you haven't added one before, it's a s…
ZSE41 Open | Close XS Sensor Manual Wake-Up Process
So you made a change to the advanced settings, but they haven't taken effect or your hub shows a pending change? You may need to wake your sensor manually! Battery powered devices are normally sleeping, to conserve battery. If you've made a change to the advanced settings for the ZSE41, the change will take effect…
How to Add Your ZSE41 Open | Close XS Sensor to SmartThings
The sensor will work great with SmartThings out of the box. Here is how to add it to your hub in no time: * Power the sensor up * Tap the plus icon in the home screen of the SmartThings app * Tap Device * Tap "Scan nearby" (in the top right corner of the screen on Android and on the bottom of the screen …
How to Add Your ZSE41 Open | Close XS Sensor to Hubitat
While the ZSE41 XS Sensors is officially supported by Hubitat version 2.2.9 or higher, we recommend the custom driver for best user experience. With the advent of Z-Wave long range (ZWLR), Hubitat now offers the option to include your long range supporting devices via standard Z-Wave mesh or with ZWLR. You can re…
ZSE41 Open | Close XS Sensor & Compatible Hubs
The ZSE41 Open |Close XS Sensor is compatible with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * Alarm.com automation hubs ( see here for details ) * Ezlo Plus * Ezlo Secure * Home Assistant (Z-Wave JS) * HomeSeer (Z-Wave Plus or Z-Wave JS Front End) * Homey * Hubitat (2.2…
How Do I Perform Hard Reset on My ZSE41 Open | Close XS Sensor?
Try factory resetting your ZSE41 sensor in case it's experiencing any configuration issues. If you've already tried excluding the Open|Close Sensor from your network, and it is unresponsive to manual and Z-Wave control, then a factory reset is the next step. A hard reset will erase all custom settings and recorded a…
ZSE41 Open | Close XS Sensor Specs
Here are the technical details and specs for the ZSE41 Open | Close XS Sensor: * Z-Wave Region: US, CA, MX / EU, UK / AU, NZ * Z-Wave Chip: 700 series (ZSE41) / 800 series (ZSE41 800LR) * Power: 1 CR2032 battery (included). Energizer, Panasonic, or Maxell recommended. Do NOT use Duracell batteries due to t…
ZSE41 Open | Close XS Sensor Advanced Settings
Here is a full list of advanced settings (parameters) for the ZSE41 XS Open | Close Sensor: LED Indicator Parameter 1: Decide if you want the LED indicator to blink when open/close status changes. Values: 0 – LED doesn't blink on status change; 1 – LED blinks on status change. Default: 1. Size: 1 byte dec B…
How to Add Your ZSE41 Open | Close XS Sensor to Home Assistant
Your ZSE41 can be added to Home Assistant in just a few easy steps! We recommend using the new JS Z-Wave integration for best results. With the new ZWaveJS integration of Home Assistant, your smart home setup becomes more seamless, robust, and future-ready. We strongly recommend upgrading to this integration to …
ZSE41 Open | Close Sensor Change Log
Here is a list of the changes and updates we made to the ZSE41 Open | Close Sensor so far. VER. 1.10 Original release. Hardware: * 700 Series Z-Wave Chip * 1 CR2032 battery (included) Firmware: 1.10 * Adjustable settings for quick and reliable open/close reporting * SmartStart + S2 Authenticated Security su…
