How to Access Advanced Settings for My ZEN15 Power Switch on SmartThings
SmartThings has transitioned to the new lua platform , and the older Groovy custom device handlers are no longer supported on SmartThings. We have created new custom Edge drivers specifically for the lua platform. Please follow the instructions on how to install the driver. If you haven't added one before, it's a s…
ZEN21 On/Off Switch VER. 4.01 Advanced Settings
Here is a full list of advanced settings (parameters) for ZEN21 On/Off Switch VER. 4.01 firmware: This is product is discontinued and replaced with ZEN71. What does that mean? On/Off Paddle Orientation Parameter 1: Choose if you want the upper paddle to turn the light on or turn the light off when tapped. Valu…
ZEN26 S2 On/Off Switch VER. 3.02 Advanced Settings
Here is a full list of advanced settings (parameters) for ZEN26 On/Off Switch VER. 3.02 firmware: On/Off Paddle Orientation Parameter 1: Choose if you want the upper paddle to turn the light on or turn the light off when tapped. Values: 0 – Upper paddle turns the light on, lower paddle turns it off (default); 1 …
How to Access Advanced Settings for My ZEN25 Double Plug on SmartThings
This is product is discontinued and replaced with the ZEN04 or ZEN15 . What does that mean? SmartThings has disbanded support for the previous groovy-based device handlers, as they have transitioned to the new lua platform . We have ensured that you can still access your device's advanced settings! We have c…
How to Access Advanced Settings for My ZSE18 Motion Sensor on SmartThings
With the SmartThings transition to a new platform (the lua platform ), the original Groovy custom device handlers are no longer supported. We have created new custom Edge drivers specifically for the lua platform. Please follow the instructions below on how to install the driver. If you haven't added one before, it…
How to Access Advanced Settings for My ZEN21 On/Off Switch on SmartThings
With the latest transition to the lua platform , the old Groovy custom device handlers will now be unusable on SmartThings. Don't worry, we've created a new custom Edge driver for the ZEN21 Switch for the lua platform! Below are the instructions on how to install the new Edge driver. If you haven't added one before…
How to Access Advanced Settings for My ZEN34 Remote Switch on SmartThings
The ZEN34 Remote Switch is a neat device - let's make sure it's set up right to take advantage of all it can do! The Edge driver is needed for the ZEN34 to be correctly recognized on the new Lua Edge platform. Below are the instructions on how to install the custom Edge driver for the device. If you haven't added…
How to Access Advanced Settings for My ZEN22 Dimmer Switch on SmartThings
This is product is discontinued and replaced with ZEN72 . What does that mean? With the latest transition to the lua platform , SmartThings will no longer support groovy-based device handlers. Don't worry, we've created a new custom Edge driver for the ZEN22 Switch for the lua platform! Below are the instructi…
ZEN15 Power Switch Advanced Settings
Here is a full list of advanced settings (parameters) for the ZEN15 Power Switch VER. 1.06 firmware (hardware 2.0): LED Indicator Control Parameter 27: Choose how the LED indicator displays power consumption on the Power Switch and when it’s on or off. Values: 0 – LED indicator will display power consumption whe…
ZEN52 Double Relay Advanced Settings
Here is a full list of advanced settings (parameters) for the ZEN52 Double Relay VER. 1.10 firmware: LED Indicator Parameter 2: Enable or disable the LED indicator to reflect the current on/off status of the connected loads (LED on when either load is on, LED off when both loads are off). Values: 0 – LED Indicat…
