ZEN22 Dimmer Switch VER. 4.01 Advanced Settings
This is product is discontinued and replaced with ZEN72 . What does that mean? Here is a full list of advanced settings (parameters) for ZEN22 Dimmer Switch VER. 4.01 firmware: On/Off Paddle Orientation Parameter 1: Choose if you want the upper paddle to turn the light on or turn the light off when tapped. Val…
How to Access Advanced Settings for My ZEN26 On/Off Switch in SmartThings
With the latest transition to the lua platform , the old Groovy custom device handlers are no longer supported on SmartThings. But don't worry, we've created a new custom Edge driver for the ZEN26 Switch for the lua platform! Below are the instructions on how to install the new Edge driver. If you haven't added one…
How to Access Advanced Settings for My ZEN32 Scene Controller on SmartThings
The ZEN32 Scene Controller is a powerful device - here's what you need to do to take full advantage of everything it can do. SmartThings is transitioning to a new platform (the lua platform ) which makes the old Groovy custom device handlers unusable, but you'll still be able to access your ZEN32's advanced settings…
How to Access Advanced Settings for ZEN16 MultiRelay on SmartThings
SmartThings is transitioning to a new platform (the lua platform ) which makes the old Groovy custom device handlers unusable. Don't worry! You can still access your device's advanced settings! We created new custom Edge drivers for the lua platform. Below are the instructions on how to install and if you haven't a…
ZEN16 MultiRelay Advanced Settings
Here is a full list of advanced settings (parameters) for ZEN16 MultiRelay VER. 2.0: On / Off Status After Power Failure Parameter 1: Set the on/off status for the relays after power failure. Values: 0 – All relays automatically turn OFF once power is restored (it does not remember the status prior to power outa…
ZEN27 S2 Dimmer VER. 3.01 Advanced Settings
Here is a full list of advanced settings (parameters) for ZEN27 S2 Dimmer VER. 3.01 firmware: On/Off Paddle Orientation Parameter 1: Choose if you want the upper paddle to turn the light on or turn the light off when tapped. Values: 0 – Upper paddle turns the light on, lower paddle turns it off (default); 1 – Up…
How to Access Advanced Settings for My ZEN27 Dimmer on SmartThings
With the latest transition to the lua platform , SmartThings will no longer support groovy-based device handlers. Don't worry, we've created a new custom Edge driver for the ZEN27 Switch for the lua platform! Below are the instructions on how to install the new Edge driver. If you haven't added one before, just fol…
ZEN71 On/Off Switch Advanced Settings
Here is a full list of advanced settings (parameters) for ZEN71 On/Off Switch: Some parameters were added in later firmware updates so please make sure you're on the latest firmware to have all of the settings below available. You can view the change log for the ZEN71 here. On/Off Paddle Orientation Parameter 1: …
How to Access Advanced Settings for ZSE29 Outdoor Motion Sensor on SmartThings
This is product is discontinued and replaced with ZSE70 . What does that mean? Now that SmartThings has transitioned to the new lua platfor m, the original Groovy custom device handlers are no longer supported. We have created new custom Edge drivers specifically for the lua platform to ensure our devices are re…
ZEN51 Dry Contact Relay Advanced Settings
Here is a full list of advanced settings (parameters) for the ZEN51 Dry Contact Relay VER. 1.10 firmware: LED Indicator Parameter 1: Enable or disable the LED indicator to reflect the current on/off status of the connected load (LED on when the load is on, LED off when the load is off). Values: 0 – LED Indicator…
