Here are the changes we made to the ZAC93 GPIO Module so far: VER. 1.01 (released 12/2022) Original release. * Based on Z-Wave SDK version 7.18.1 (read full release notes from Silicon Labs here ) VER. 1.03 (released 12/2022 as OTW) * Based on Z-Wave SDK version 7.18.3 (read full release notes from Silicon Lab…
Here is a list of updates we made to the ZEN74 700 Series Toggle Dimmer so far: VER. 1.0 (released 3/2021) Original release Hardware * 700 series Z-Wave chip * New wiring for 3-way and 4-way set-ups compared to the ZEN24 model (always follow the diagrams in the manual ) * No heatsink tabs and only 1.16" deep …
Here are the changes we made to the ZSE43 Tilt | Shock XS Sensor model so far: VER. 1.10 Original release. Hardware: * 700 Series Z-Wave Chip * 1 CR2032 battery (included) Firmware: 1.10 * Adjustable settings for quick and reliable open/close reporting * SmartStart + S2 Authenticated Security supported VER.…
Here is a list of updates we made to the ZSE11 Q Sensor so far: VER. 1.0 (released 04/2021) Original release Hardware: * 500 Series Z-Wave chip * Mounting bracket included * 2 CR123A batteries included Firmware: 1.09 * S2 Security * Advanced settings to adjust motion, temperature, humidity, and light report…
Here is a list of the changes and updates we made to the ZEN55 Smoke & CO Detector Bridge so far. VER. 1.0 (released 4/2023) Original release. Hardware: * 800 Series Z-Wave chip * Pigtail wires for easy installation Firmware: 1.20 * Separate reports for smoke and CO alerts * Z-Wave Long Range ready * Smart…
Here is a list of the changes and updates we made to the ZSE42 Water Leak XS Sensor so far. VER. 1.10 Original release. Hardware: * 700 Series Z-Wave Chip * 1 CR2032 battery (included) Firmware: 1.10 * Adjustable settings for quick and reliable leak reporting * SmartStart + S2 Authenticated Security support…
Here is a list of the changes and updates we made to the ZAC36 Titan Water Valve Actuator so far. VER. 1.0 (released 8/2021) Original release. Hardware: * 700 Series Z-Wave chip * Smart auto-calibration process * IP 66 outdoor rating * Included 4.75' water leak probe * Installation Requirements: 0.5" - 1.25…
Here is a list of the changes and updates we made to the ZSE41 Open | Close Sensor so far. VER. 1.10 Original release. Hardware: * 700 Series Z-Wave Chip * 1 CR2032 battery (included) Firmware: 1.10 * Adjustable settings for quick and reliable open/close reporting * SmartStart + S2 Authenticated Security su…
This is product is discontinued and replaced with ZEN04 . What does that mean? Here is a list of updates we made to the ZEN06 model so far. VER. 1.0 (released 10/2016) Original release. Hardware: * Power monitoring, 2 USB ports (no Z-Wave control or reports), smart LED ring Firmware: 1.01 * Overload protec…
Here is a list of the updates we applied to the ZEN52 Double Relay so far. VER. 1.0 (released 1/2022) Original release. Hardware: * 700 Series Z-Wave chip * Single pole or direct 3-way capability * Pigtail wires for easy installation * Wiring limitation: in certain scenarios with too much noise on the wires,…