ZEN24 Toggle Dimmer Change Log
This is product is discontinued and replaced with the ZEN74 . What does that mean? Here are the changes and updates we made to the ZEN24 model so far. VER. 1.0 (released 12/2016) Original release. Hardware: * Did NOT include neutral jumper * Implemented the classic 3-way functionality with a dedicated add-o…
ZEN51 Dry Contact Relay Change Log
Here is a list of the changes and updates we made to the ZEN51 Dry Contact Relay so far. VER. 1.0 (released 1/2022) Original release. Hardware: * 700 Series Z-Wave chip * Single pole or direct 3-way capability * Pigtail wires for easy installation * Wiring limitation: in certain scenarios with too much noise…
ZEN23 Toggle Switch Change Log
This is product is discontinued and replaced with ZEN73 . What does that mean? Here's where you'll find the changes and updates we made to the ZEN23 switch model so far. VER. 1.0 (released 6/2016) Original release. Hardware: * Did NOT include neutral jumper or short screws for wall plate * Implemented the c…
ZEN76 S2 On/Off Switch Change Log
Here are the improvements and changes we made to the ZEN76 S2 On/Off Switch model so far. VER. 1.0 (released 12/2020) Original release. Hardware: * Based on the ZEN26 500 series version with simple direct 3-way solution * 700 Series Z-Wave chip * Just 1.16" deep * No heatsink tabs * Multicolor LED indicator…
ZST10 700 Z-Wave Stick Change Log
This is product is discontinued and replaced with ZST39 . What does that mean? Here are the changes we made to the ZST10 700 Z-Wave Stick model so far: VER. 7.17.1 Original release. Based on Z-Wave DSK version 7.17.1 (read full release notes from Silicon Labs here ) VER. 7.18.1 Based on Z-Wave DSK versio…
ZSE44 Temperature | Humidity XS Sensor Change Log
Here is a list of the changes and updates we made to the ZSE44 Temperature | Humidity XS Sensor so far. VER. 1.10 Original release. Hardware: * 700 Series Z-Wave Chip * 1 CR2450 battery (included) Firmware: 1.10 * Adjustable settings for accurate and quick temperature/humidity reporting * SmartStart + S2 Au…
ZSE19 S2 MultiSiren Change Log
This is product is discontinued and does not have a replacement yet. New product in development. What does that mean? Here are the updates we applied to the ZSE19 model so far. VER. 1.0 (released 11/2018) Original release. Hardware: * Siren alarm, smart speaker, and LED indicator all built-in, battery power F…
ZSE40 700 4-in-1 Sensor Change Log
This is product is discontinued and replaced with ZSE11 . What does that mean? Here are the features we added to the 4-in-1 Sensor so far. VER. 1.0 (released 9/2016) Hardware: * 2 x AAA batteries * Mounting bracket included * 500 Series Z-Wave chip Firmware: 16.09 * 4 LED indicator modes * 12h wake-up int…
ZEN71 On/Off Switch Change Log
Here is a log of upgrades and improvements we made to the ZEN71 On/Off Switch 700 model so far. VER. 1.0 (released 12/2020) Original release. Hardware: * Based on the ZEN21 500 series version with a direct 3-way solution * 700 Series Z-Wave chip * Just 1.16" deep * No heatsink tabs * Multicolor LED indicato…
ZEN20 Power Strip Change Log
Here are the changes and improvements we made to the ZEN20 model so far. VER. 1.0 (released 7/2017) Original release. Hardware: * No mounting screw holes, straight plug Firmware: 20.15 * No advanced settings, no power monitoring, no status recovery after power failure (defaults to off) VER. 2.0 (released 11/2…
