ZEN55 Smoke & CO Detector Bridge Change Log
Here is a list of the changes and updates we made to the ZEN55 Smoke & CO Detector Bridge so far. VER. 1.0 (released 4/2023) Original release. Hardware: * 800 Series Z-Wave chip * Pigtail wires for easy installation Firmware: 1.20 * Separate reports for smoke and CO alerts * Z-Wave Long Range ready * Smart…
ZAC36 Valve Actuator Change Log
Here is a list of the changes and updates we made to the ZAC36 Titan Water Valve Actuator so far. VER. 1.0 (released 8/2021) Original release. Hardware: * 700 Series Z-Wave chip * Smart auto-calibration process * IP 66 outdoor rating * Included 4.75' water leak probe * Installation Requirements: 0.5" - 1.25…
ZEN23 Toggle Switch Change Log
This is product is discontinued and replaced with ZEN73 . What does that mean? Here's where you'll find the changes and updates we made to the ZEN23 switch model so far. VER. 1.0 (released 6/2016) Original release. Hardware: * Did NOT include neutral jumper or short screws for wall plate * Implemented the c…
ZSE42 Water Leak XS Sensor Change Log
Here is a list of the changes and updates we made to the ZSE42 Water Leak XS Sensor so far. VER. 1.10 Original release. Hardware: * 700 Series Z-Wave Chip * 1 CR2032 battery (included) Firmware: 1.10 * Adjustable settings for quick and reliable leak reporting * SmartStart + S2 Authenticated Security support…
ZSE19 S2 MultiSiren Change Log
This is product is discontinued and has been replaced by the ZSE50 Siren & Chime : What does that mean? Documentation for the new ZSE50 Siren & Chime can be found here: ZSE50 Knowledge Base Here are the updates we applied to the ZSE19 model so far. VER. 1.0 (released 11/2018) Original release. Hardware: …
ZSE41 Open | Close Sensor Change Log
Here is a list of the changes and updates we made to the ZSE41 Open | Close Sensor so far. VER. 1.10 Original release. Hardware: * 700 Series Z-Wave Chip * 1 CR2032 battery (included) Firmware: 1.10 * Adjustable settings for quick and reliable open/close reporting * SmartStart + S2 Authenticated Security su…
ZAC93 GPIO Module Change Log
Here are the changes we made to the ZAC93 GPIO Module so far: VER 1.01 (released 12/2022) Original release. * Based on Z-Wave SDK Version 7.18.1 (read full release notes from SIlicon Labs here ) VER. 1.03 (released 12/2022 as OTW) * Based on Z-Wave SDK Version 7.18.3 (read full release notes from Silicon Labs…
ZEN51 Dry Contact Relay Change Log
Here is a list of the changes and updates we made to the ZEN51 Dry Contact Relay so far. VER. 1.0 (released 1/2022) Original release. Hardware: * 700 Series Z-Wave chip * Single pole or direct 3-way capability * Pigtail wires for easy installation * Wiring limitation: in certain scenarios with too much noise…
ZSE40 700 4-in-1 Sensor Change Log
This is product is discontinued and replaced with ZSE11 . What does that mean? Here are the features we added to the 4-in-1 Sensor so far. VER. 1.0 (released 9/2016) Hardware: * 2 x AAA batteries * Mounting bracket included * 500 Series Z-Wave chip Firmware: 16.09 * 4 LED indicator modes * 12h wake-up int…
ZST10 700 Z-Wave Stick Change Log
This is product is discontinued and replaced with ZST39 . What does that mean? Here are the changes we made to the ZST10 700 Z-Wave Stick model so far: VER. 7.17.1 Original release. Based on Z-Wave DSK version 7.17.1 (read full release notes from Silicon Labs here ) VER. 7.18.1 Based on Z-Wave DSK versio…
