ZSE43 Tilt | Shock XS Sensor Shows Offline in SmartThings
If your ZSE43 XS sensor is included but shows offline, it may be a range or connectivity issue. The Network Repair feature can refresh your mesh network's connections using the SmartThings app. Steps for Network Repair below: * Open your SmartThings app and locate your SmartThings hub under Devices. Tap the hub…
Can't Add My ZSE43 Tilt | Shock XS Sensor to SmartThings
Having trouble including your ZSE43? Excluding the device may help. Even if your Tilt|Shock XS Sensor was never successfully added to SmartThings, exclusion acts as a soft reset. It can help with a variety of configuration and inclusion issues. 800 series only: Exclusion before inclusion applies to the 700 seri…
Can't Add My ZEN37 Wall Remote to Home Assistant
If you're having issues including your Wall Remote to Home Assistant, exclusion is the first thing to try. It may sound counter-intuitive, but excluding a device is simply a soft, hub-based reset that resolves most inclusion or configuration issues. A device doesn't need to be included first to be able to be exclude…
ZAC36 & Common Troubleshooting Steps
Having an issue with the ZAC36? We've gathered the most common questions and provided troubleshooting steps and solutions below. Before attempting any troubleshooting on your ZAC36, you'll need to ensure the Z-Wave button is not locked. How do I Tell if the Z-Wave Button is Locked? * If the Z-Wave button is unl…
My ZSE18 Motion Sensor is Not Reporting Reliably to My Hub
Are you experiencing issues with your ZSE18 Motion sensor despite successfully installing and linking it to your hub? Do you find that it's consistently displaying incorrect status readings, such as being stuck on motion or no motion, or perhaps failing to generate reports altogether? Check out the troubleshooting st…
My ZSE41 Open | Close XS Sensor Shows Offline in SmartThings
If your sensor is included but shows offline, it may point to a range or connectivity issue. You can use the Network Repair feature to refresh your mesh network's connections using the SmartThings app. See the steps for Network Repair below: * Open your SmartThings app and locate your SmartThings hub under Devi…
There is No LED Activity and My ZEN51 Dry Contact Relay is Unresponsive
Is the ZEN51 Dry Contact Relay installed, but there is no LED activity, and the relay is unresponsive? Please check the list below. * First, check that you have restored power to the unit at the breaker panel, following the completion of the installation. * Ensure the device is connected to an electric power s…
There is No LED Activity and My ZSE11 Q Sensor is Unresponsive
The ZSE11 Q Sensor can be powered by 2 CR 123A batteries (included) and/or a micro-USB cable (sold separately). Once the batteries and/or USB cable are inserted, the ZSE11 Q Sensor's LED indicator should flash any time you press the Z-Wave button. * 500/700 series: The 700 series ZSE11 sensor can ONLY ever be powe…
My ZSE42 Leak Sensor is Not Reporting Reliably To My Hub
Have you installed and added your ZSE42 sensor to the hub, but you're not receiving accurate reports? Is your sensor consistently showing either wet or dry status, or is it failing to generate reports? Don't worry, we've compiled the most effective troubleshooting steps for you to try before contacting our support te…
My ZSE70 Outdoor Motion Sensor is Not Reporting Reliably to My Hub
Are you experiencing issues with your ZSE70 Outdoor Motion sensor despite successfully installing and linking it to your hub? Do you find that it's consistently displaying incorrect status readings, such as being stuck on motion or no motion, or perhaps failing to generate reports altogether? Check out the troublesho…
