ZEN55 Smoke & CO Detector Bridge Advanced Settings
Here is a full list of advanced settings (parameters) for the ZEN55 Smoke & CO Detector Bridge: LED Indicator Parameter 1: Choose if you want the LED to indicate the on/off status of the connected load or if you want it to remain on or off at all times. Values: 0 – LED always off 1 – LED on when load on, LED off…
ZSE40 4-in-1 Sensor Advanced Settings
This is product is discontinued and replaced with ZSE11 . What does that mean? Here is a full list of advanced settings (parameters) for the ZSE40 700 Series 4-in-1 Sensor on firmware 1.10: Temperature Sensor Parameter 1: Set the temperature unit for your sensor. NOTE: many home automation platforms will au…
How to Access Advanced Settings for My ZSE18 Motion Sensor on SmartThings
With the SmartThings transition to a new platform (the lua platform ), the original Groovy custom device handlers are no longer supported. We have created new custom Edge drivers specifically for the lua platform. Please follow the instructions below on how to install the driver. If you haven't added one before, it…
How to Access Advanced Settings for My ZEN15 Power Switch on SmartThings
SmartThings has transitioned to the new lua platform , and the older Groovy custom device handlers are no longer supported on SmartThings. We have created new custom Edge drivers specifically for the lua platform. Please follow the instructions on how to install the driver. If you haven't added one before, it's a s…
ZEN21 On/Off Switch VER. 4.01 Advanced Settings
Here is a full list of advanced settings (parameters) for ZEN21 On/Off Switch VER. 4.01 firmware: This is product is discontinued and replaced with ZEN71. What does that mean? On/Off Paddle Orientation Parameter 1: Choose if you want the upper paddle to turn the light on or turn the light off when tapped. Valu…
ZEN23 On/Off Toggle Switch VER. 4.01 Advanced Settings
This is product is discontinued and replaced with ZEN73 . What does that mean? Here is a full list of advanced settings (parameters) for ZEN23 On/Off Toggle Switch VER. 4.01 firmware: On/Off Toggle Orientation Parameter 1: Choose if you want to turn the light on or turn the light off when you toggle the switch …
How to Access Advanced Settings for ZEN30 Double Switch on SmartThings
SmartThings is transitioning to a new platform (the lua platform ) which makes the old Groovy custom device handlers unusable, but you'll still be able to access your ZEN30's advanced settings. We created new custom Edge drivers for the lua platform. Below are the instructions on how to install and if you haven't a…
How to Access Advanced Settings for My ZEN32 Scene Controller on Hubitat
The ZEN32 is officially integrated with Hubitat and should be recognized with the correct driver at inclusion. If you're having trouble with the built-in device driver for the Scene Controller, you can always give the community driver a try. You should first check if your Hubitat platform is up-to-date on its platfo…
ZEN26 S2 On/Off Switch VER. 3.02 Advanced Settings
Here is a full list of advanced settings (parameters) for ZEN26 On/Off Switch VER. 3.02 firmware: On/Off Paddle Orientation Parameter 1: Choose if you want the upper paddle to turn the light on or turn the light off when tapped. Values: 0 – Upper paddle turns the light on, lower paddle turns it off (default); 1 …
How to Access Advanced Settings for the ZEN72 Dimmer Switch on SmartThings
With SmartThings transitioning to a new platform (the lua platform ), the old Groovy custom device handlers will now be unusable. Make sure to install the new custom Edge driver for the ZEN72 Dimmer! Below are the steps for how to install and if you haven't added one before, it's an easy process that only takes a f…
