-
My ZSE43 Tilt | Shock Sensor is Not Reporting Reliably To My Hub
Have you installed and integrated your ZSE43 Tilt | Shock sensor into the hub, but are encountering discrepancies in its reports? Is it persistently showing either open or closed status, or failing to provide reports altogether? Rest assured, we're equipped to guide you through the best troubleshooting measures befor…
-
How to Access Advanced Settings for My ZSE43 Tilt | Shock XS Sensor on SmartThings
With the SmartThings transition to a new platform (the lua platform ), the original Groovy custom device handlers are no longer supported. We have created new custom Edge drivers specifically for the lua platform. Please follow the instructions on how to install the driver. If you haven't added one before, it's a s…
-
Zooz Security Sensors & Sirens Comparison
Building a reliable smart home security system starts with the right sensors in the right places. Whether you are protecting against intruders, water damage, fire, or environmental hazards, each type of device plays a specific role in keeping your home safe and responsive. In this guide, we compare all of our availa…
-
How to Add Your ZSE43 Tilt | Shock XS Sensor to SmartThings
The sensor will work great with SmartThings out of the box. You can also add the custom lua Edge driver to access all the advanced settings for the device. Follow the instructions here to install the Edge driver. Here is how to quickly include the ZSE43 to your hub: * Power the sensor up * Tap the plus ic…
-
How to Add Your ZSE43 Tilt | Shock XS Sensor to Hubitat
While the ZSE43 Tilt | Shock Sensor is officially supported by Hubitat version 2.2.9 or higher, we recommend the custom driver for best user experience. If you find you have an issue including the ZSE41 Sensor to Hubitat, please try the exclusion process first. This can be done even if it was never connected to th…
-
ZSE43 Tilt | Shock XS Sensor & Compatible Hubs
The Tilt |Shock XS Sensor is compatible with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * Home Assistant * HomeSeer (Z-Wave Plus or Z-Wave JS Front End) * Homey ( Zooz App for Homey ) * Hubitat (2.3.0 or higher) * Indigo (NOTE: no security, Indigo does not support S2 Z-Wave…
-
How Do I Perform Hard Reset on My ZSE43 Tilt | Shock XS Sensor?
A factory reset can help resolve some ZSE43 configuration issues. When to perform a factory reset: * You have tried to exclude the sensor from your network * It is unresponsive to manual and Z-Wave control A hard reset will erase all custom settings and recorded activity, returning the device to factory default…
-
ZSE43 Tilt | Shock XS Sensor Specs
Here are the technical details and specs for the ZSE43 Tilt | Shock XS Sensor: VER 3.0 * Z-Wave Region: US, CA, MX * Z-Wave Chip: 800 series * Power : 1 x CR2450 battery. Energizer, Panasonic, or Maxell recommended. Do NOT use Duracell batteries due to the extra bitter coating that prevents contact. * Ope…
-
ZSE43 Tilt | Shock XS Sensor Change Log
Here are the changes we made to the ZSE43 Tilt | Shock XS Sensor model so far: VER. 1.10 Original release. Hardware: * 700 Series Z-Wave Chip * 1 CR2032 battery (included) Firmware: 1.10 * Adjustable settings for quick and reliable open/close reporting * SmartStart + S2 Authenticated Security supported VER.…
-
How to Add the ZSE43 Tilt | Shock XS Sensor to Home Assistant
Your ZSE43 Tilt | Shock Sensor can be added to Home Assistant in just a few easy steps! We recommend using the new JS Z-Wave integration for best results. With the new ZWaveJS integration of Home Assistant, your smart home setup becomes more seamless, robust, and future-ready. We strongly recommend upgrading to …
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
