How to Add Your ZSE44 Temperature | Humidity XS Sensor to Hubitat
While the ZSE44 XS Sensors will pair with your hub without additional setup on Hubitat, we recommend using the custom driver with this model. With the advent of Z-Wave long range (ZWLR), Hubitat now offers the option to include your long range supporting devices via standard Z-Wave mesh or with ZWLR. You can read…
ZEN20 Power Strip & Compatible Hubs
Will the ZEN20 Power Strip work with my hub? Last time we checked, the ZEN20 Power Strip worked great with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * Ezlo Plus * Ezlo Secure * Fibaro Home Center 2 * Fibaro Home Center Lite * Home Assistant * HomeSeer (Z-Wave Plus or Z-Wa…
How to Use the ZEN16 MultiRelay as a Sprinkler Controller on Hubitat
Schedule and manage your sprinkler system from Hubitat using the ZEN16 MultiRelay: use it to automate up to 3 zones! The below instructions describe a Z-Wave-only control system. Do NOT connect your existing timer to the Sw inputs on the MultiRelay. Here is how you can use your MultiRelay as a multi-zone sprinkler c…
ZEN22 Dimmer & Compatible Hubs
This is product is discontinued and replaced with ZEN72 . What does that mean? Will the ZEN22 Dimmer work with my hub? The dimmer works great with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * 2GIG (no advanced settings or scene control available) * ADT Pulse (no advanced se…
How to Add Your ZSE40 4-in-1 Sensor to Hubitat
This is product is discontinued and replaced with ZSE11 . What does that mean? The ZSE40 4-in-1 Sensor will pair with your hub quickly and without additional setup thanks to being officially integrated with Hubitat. You should have automatic full access to the sensor's advanced settings in the device view on Hubi…
How to Add Your ZEN76 Switch to Hubitat
Your ZEN76 Switch will work with Hubitat - get it included in just a few easy steps! For better user experience, we recommend the community driver . With the advent of Z-Wave long range (ZWLR), Hubitat now offers the option to include your long range supporting devices via standard Z-Wave mesh or with ZWLR. You can…
ZEN27 S2 Dimmer & Compatible Hubs
Will the S2 Dimmer ZEN27 work with my hub? The dimmer works great with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * 2GIG (no advanced settings or scene control available) * ADT Pulse (no advanced settings or scene control available) * Alarm.com (no advanced settings or scene …
How to Access Advanced Settings for the ZEN72 Dimmer Switch on Hubitat
Accessing your ZEN72's advanced settings will be a breeze with the custom device driver installed. All About Advanced Settings The terminology for advanced settings varies depending on your Z-Wave hub. For instance, Hubitat lists them under the “Preferences” tab. Despite these differences in naming, the purpose rem…
ZEN26 S2 On/Off Switch & Compatible Hubs
Will the ZEN26 S2 On/Off Switch work with my hub? The switch works great with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * 2GIG (no advanced settings available) * ADT Pulse (no advanced settings available) * Alarm.com (no advanced settings available) * Almond (Securify) * F…
How to Perform an OTA Firmware Update on Zooz Devices on Hubitat
Hubitat has firmware update options available for C-5, C-7 and C-8. If you're on Hubitat C-7 or C-8, the community developer Bryan Copeland created a tool to update Z-Wave devices over the air straight from the hub. Click here to learn more and remember to say thanks to Bryan in the forum thread if you end up usin…
