ZEN53 DC Motor Controller & Compatible Hubs
The ZEN53 DC Motor Controller is compatible with the following Z-Wave systems: * Z-Box Hub (recommended for Zooz products) * Home Assistant (Z-Wave JS) * HomeSeer (Z-Wave Plus or Z-Wave JS Front End) * Hubitat ( custom driver required ) * SmartThings ( Edge driver required ) Will the device work with my alarm…
ZEN53 DC Motor Controller Specs
Here are the technical details and specs for the ZEN53 DC Motor Controller: * Z-Wave Frequency : 908.42 MHz (US) * Power : 6-32 VDC * Maximum Loads : 1.5 A (use with DC motors only) * Z-Wave Range : Up to 300 feet line of sight (or up to a mile with Long Range enabled) * Dimensions : 1.5" tall, 1.4" wide, 0.7…
ZEN53 DC Motor Controller Advanced Settings
Here is a full list of advanced settings (parameters) for the ZEN53 DC Motor Controller VER. 1.10 firmware: On / Off Status After Power Failure Parameter 1: Set the status for the controller after power failure. Values: 0 – forced to closed (regardless of state prior to power outage); 1-99 – forced to open in t…
Zooz SmartThings Edge Drivers
SmartThings is slowly transitioning from the legacy groovy platform to the new lua platform . This creates new challenges for seamless integration as well as access to key and advanced features of our devices. As usual, we're committed to providing the best possible experience to all of our customers, regardless of …
